优秀多段均衡效果器rob papen rp-eq v1.0.2内置单声道立体声滤波器

流云高飞 · 发表于 2021-9-16 00:00:00

RP系列插件，效果都非常的棒，目前的界面已经开始做得更漂亮了。推荐

When you open RP-EQ in your Reason Rack you will see that it is far from a bread-and-butter equalizer and several unique elements were added to the core equalizer unit. Not to mention the smooth sound it provides which makes it stand out!

当您在Reason Rack中打开RP-EQ时，您将看到它远离面包和黄油均衡器，核心均衡器单元中添加了几个独特的元件。更不用说它提供的平滑声音，这使它脱颖而出！

The toolbox now includes a MONO/STEREO Split filter, which is used a lot in modern EDM/Dance music to get a very tight low end. The Air section is also fantastic on your master channel to open your mix in a stunning way.

工具箱现在包括一个单声道/立体声分离滤波器，它在现代EDM/舞蹈音乐中被大量使用，以获得非常紧凑的低端。主频道的Air部分也非常出色，可以以惊人的方式打开混音。

And in true Rob Papen style, RP–EQ comes with many great Presets including contributions from several well-known DJs and Producers for instant user inspiration.

在真正的Rob Papen风格中，RP–EQ配备了许多很棒的预设，包括来自几位著名DJ和制作人的贡献，以获得即时用户灵感。

Features: Mastering and channel EQ with built-in Spectrogram for Propellerhead Reason 9.2 or higher

特点：带内置频谱图的主控和通道均衡器，适用于螺旋桨机头Reason 9.2或更高版本

EQ – 8 Band EQ with Frequency, Gain and Bandwidth. – EQ dials and function controls. – EQ graphic screen. – Mid/Side mode with 4 Mid bands and 4 Sidebands. – Lock mode for Frequency and Gain. – MIDI Note selecting for each band instead of using Frequency. – Each band can be made visual or hidden in the graphic field. – Each band can be played solo.

EQ–具有频率、增益和带宽的8波段EQ均衡器刻度盘和功能控制EQ图形屏幕–具有4个中间频带和4个边频带的中间/侧面模式频率和增益锁定模式为每个波段选择MIDI音符，而不是使用频率每个波段都可以在图形字段中显示或隐藏每个乐队都可以单独演奏。

Saturation – Mild tube saturation with a selector for pre-eq.

饱和–温和的管饱和，带有前置均衡器选择器。

Air – Open your mix or track by using the Air feature. – Frequency range from 30kHz to 40kHz. – Gain of 6db max.

Air–使用Air功能打开混音或曲目频率范围从30kHz到40kHz最大增益为6db。

Filter – HiPass Filter in 12dB or 24dB mode. – LowPass Filter in 12dB or 24dB mode. – Two Filter colour/sound types – Resonance (Q) control.

过滤器–12dB或24dB模式下的HiPass过滤器12dB或24dB模式下的低通滤波器两种滤光片颜色/声音类型–共振（Q）控制。

Mono / Stereo Filter

单声道/立体声滤波器

Great tool for inside the mix bus or while mastering. – Instead of frequency you also can select a MIDI note as the split point for the filter. – Clicking on the Mono / Stereo button will turn On / Off the Mono / Stereo effect. Controls are: – Frequency. – Solo on/off. – Visual inside the graphic display On/off. – Several Modes. These determine how the sound is ‘mono-feed’, either using the left or right channels, the average of the left & right channels (L+R), or the difference between the left & right channels (L – R).

非常适合在混合总线内部或掌握时使用除了频率，您还可以选择MIDI音符作为过滤器的分割点单击单声道/立体声按钮将打开/关闭单声道/立体声效果。控制为：–频率–单独开/关图形显示打开/关闭时的可视内部有几种模式。通过使用左声道或右声道、左声道和右声道的平均值（L+R）或左声道和右声道之间的差值（L–R），这些参数确定声音的“单声道馈送”方式。

Back Panel Screen -The back screen of RP-EQ shows the Input / Output audio connections and also CV input to each band’s frequency, bandwidth & gain, also the Low-pass / High-pass filter frequency and Q(resonance).

后面板屏幕-RP-EQ的后屏幕显示输入/输出音频连接，以及每个频带的频率、带宽和增益的CV输入，以及低通/高通滤波器频率和Q（共振）。

You need R2R’s Reason release and TEAM R2R Reason Rack Extension Cache Builder

您需要R2R的原因版本和团队R2R原因机架扩展缓存生成器

Copy the RackExtension folder to

将RackXTension文件夹复制到

“%APPDATA%\Propellerhead Software\RackExtensions\”

%APPDATA%\PropperHead软件\RackExtensions\'

Copy *.R2RRECACHE file to

将*.R2RRECACHE文件复制到

“%APPDATA%\Propellerhead Software\R2RRECACHE\”

%APPDATA%\PropperHead软件\R2RRECACHE\“

After you add new RackExtension(s), you need to rebuild the RE cache:

添加新的RackXTension后，需要重建重新缓存：

– Just run “RECacheBuilder.exe” from TEAM R2R Reason Rack Extension Cache Builder

–只需从团队R2R原因机架扩展缓存生成器运行“RECacheBuilder.exe”

– Cache file will be built.

–将生成缓存文件。

– Done!

-完成！

游客，如果您要查看本帖隐藏内容请回复