累计签到:1 天 连续签到:1 天
|
WIN格式: | VST VST3 AAX WIN(64位) |
MAC格式: | |
Linux格式: | |
其它系统: | |
其它系统格式: | 问题投诉 |
通用格式: | |
其它系统: | |
容量: | 50M |
微信公众号输入命令: | 请在微信公众号中输入前面红色字体命令获取提取码等内容,这里没有内容就表示不需要 |
公众号回复内容: | 隐藏内容 查看操作方法 |
下载方式: | 网盘下载 当前帖子ID:
|
关注公众号 | vstivip |
An excellent anti-clipping solution – ease of use and uncompromising sound quality.
出色的防夹解决方案–使用方便,音质卓越。
Create masters with competitive volume and maintain audio purity:
创造具有竞争力的音量和保持音频纯度的大师:
Brainworx bx_clipper clips waveform peaks above a specified threshold level (Ceiling). This allows you to create mixes that play louder without increasing the peak level. Unlike a limiter, bx_clipper increases the volume while avoiding the effect of clipped pumping.
Brainworx bx_clipper剪辑高于指定阈值水平(Ceiling)的波形峰值。这允许您在不增加峰值级别的情况下创建播放声音更大的混音。与限制器不同,bx_clipper增加了体积,同时避免了削波泵浦的影响。
It’s your limiter’s new best friend:
这是你限制器的新好友:
Using bx_clipper at the end of the mastering chain – before or after the limiter – will help you create modern and crystal clear mixes that rival the competition in density and volume. bx_clipper picks up where your limiter left off and bridges the gap between loud and super loud.
在母版链末端使用bx_clipper,无论是在限制器之前还是之后,都将帮助您创造出在密度和体积上与竞争对手相媲美的现代清澈混合物。bx_clipper从你的限幅器停止的地方开始,弥合了大声和超大声之间的差距。
Choose from smooth to sharp clipping effects:
从平滑剪裁效果到尖锐剪裁效果进行选择:
The clipping mechanism implemented in bx_clipper has two modes of operation. FET mode delivers smooth and natural sound, while Diode mode delivers harsh distortion. Combined with bx_clipper’s Ceiling and Knee controls, FET mode and Diode mode allow you to choose from a range of soft and hard clipping effects.
bx_clipper中实现的削波机制有两种操作模式。FET模式提供平滑自然的声音,而二极管模式提供刺耳的失真。结合bx_clipper的天花板和膝盖控制,FET模式和二极管模式允许您从一系列软剪辑和硬剪辑效果中进行选择。
Maximize volume without distortion:
最大化音量而不失真:
bx_clipper’s Auto Ceiling feature analyzes peaks in the audio signal and automatically sets the plugin’s Ceiling level. The level at which Ceiling is set allows you to maximize perceived loudness while avoiding unwanted distortion. As a result, bx_clipper allows you to create very loud masters without destroying the mix.
bx_clipper的自动上限功能分析音频信号中的峰值,并自动设置插件的上限级别。通过设置“天花板”的级别,可以最大化感知的响度,同时避免不必要的失真。因此,bx_clipper允许您在不破坏混音的情况下创建非常响亮的主控器。
Avoid volume offset when comparing with equal volume:
在与相等的音量进行比较时避免音量偏移:
The Auto Trim function implemented in bx_clipper analyzes the RMS difference between the input and processed signals. Auto Trim automatically adjusts the bx_clipper’s output level and allows for loudness comparisons. It helps deal with summing-related peaks that occur in groups of instruments without throwing off the balance of the mix.
bx_clipper中实现的自动微调功能分析输入信号和处理信号之间的RMS差异。Auto Trim自动调整bx_clipper的输出电平,并允许进行响度比较。它有助于处理组合乐器中出现的求和相关峰值,而不会破坏组合的平衡。
Clipping Mids and Sides of Mixes Independently:
独立剪裁混合物的中间和侧面:
Like other Brainworx products, the bx_clipper has dual mono and M/S modes for enhanced stereo control. When working with an unbalanced mix, you can apply different clipping effects to the left and right channels. Create loud masters with clarity using an aggressive Diode mode on the sides and a softer FET in the center of the stereo image.
与Brainworx的其他产品一样,bx_clipper具有双单声道和M/S模式,可增强立体声控制。使用不平衡混合时,可以对左右通道应用不同的剪裁效果。在侧面使用激进的二极管模式,在立体图像的中心使用更柔和的FET,创造出清晰的大声大师。
Analog warmth and digital-only features:
模拟保暖和纯数字功能:
Combining analog circuitry with digital design, the bx_clipper provides the best of both worlds. Features like Ambience let you listen to information lost during clipping and create unique, creative effects. Another feature of the digital performance is the Wet control, which, when pushed beyond 100%, provides several times the distortion, allowing you to give drums and snares the characteristic flavor of drum synths of the 80s and 90s.
bx_clipper将模拟电路与数字设计相结合,提供了两全其美的效果。Ambience等功能可以让你倾听剪辑过程中丢失的信息,并创造独特的创造性效果。数字表演的另一个特点是湿式控制,当超过100%时,它会提供数倍的失真,让你给鼓和圈套带来80年代和90年代鼓合成器的特色。
Features
功能
Increase volume by cutting waveform peaks. Choose between soft and hard cut.
通过切割波形峰值来增加音量。在软剪裁和硬剪裁之间进行选择。
Apply smooth and natural clipping in FET mode.
在FET模式下应用平滑自然的削波。
Create harsh distortion with Diode mode.
使用二极管模式创建严重失真。
Perform A/B level comparisons using Auto Trim.
使用“自动微调”执行A/B级别比较。
Listen to information lost during clipping using the Ambience button.
使用“环境”按钮收听剪辑过程中丢失的信息。
Use the full range of soft clipping while avoiding hard clipping with Auto Ceiling.
使用全范围的软剪裁,同时避免使用Auto Ceiling进行硬剪裁。
Independent processing of the left-right and middle channels
左右通道和中间通道的独立处理
Oversampling up to 32x.
过采样高达32倍。
Peak and waveform meters.
峰值和波形计。
Scalable and color-customizable user interface.
可扩展和颜色可自定义的用户界面。
0: Install Plugin Alliance Wrapper Core
0:安装插件联盟包装核心
1: Install your plugin.
1:安装你的插件。
2: Run our keygen.
2:运行我们的keygen。
3: Launch the plugin. Start activation.
3:启动插件。开始激活。
4: Click “I’m Offline”.
4:单击“我脱机了”。
5: Copy the device ID to the keygen.
5:将设备ID复制到keygen。
6: Generate a license using our keygen.
6:使用我们的keygen生成许可证。
7: Click “Open License” and import the license.
7:单击“打开许可证”并导入许可证。
8: Click “Activate”.
8:点击“激活”。
|
|