Analog Obsession COMPER v1.1 串联双压缩效果器VST3 AAX AU WiN macOS龙门阵音乐插件免费下载

流云高飞 · 发表于 2022-11-18 19:33:34

"Multi-Mode", "Serial Compression" with "Switchable" and "Blendable" circuits!

“多模式”、“串行压缩”和“可切换”电路！

Confusing?

令人困惑

Not at all! Let me explain!

一点也不！让我解释一下！

Basically, COMPER has two compressor in series. Top side compressor is first and bottom side is second compressor. As you can see, top side labeled as "INTERNAL" and bottom side labeled as "INTERNAL / EXTERNAL". This means top compressor has no external side-chain feature. But bottom one has both internal and external side-chain feature. This is "Serial Compressor". Great for coloring and also, taming peaks at the same time. Lots of scenarios! Simple...

基本上，COMPER有两个串联的压缩机。顶侧压缩机为第一压缩机，底侧为第二压缩机。如您所见，顶面标记为“内部”，底面标记为内部/外部。这意味着顶部压缩机没有外部侧链功能。但底部的一个具有内部和外部侧链特征。这是“串行压缩机”。非常适合着色，同时也可以驯服山峰。很多场景！易于理解的

Let's talk about Multi-Mode!

让我们来谈谈多模式！

Each has three compression mode. VCA, FET and OPTO. You can simply select which mode you want to use. So, it's basic "Switchable" mode compressor. But these buttons are not radio-button to select mode with one click. You need to click active button to disable it and enable another mode. Extra clicks??? Why?!?

每个都有三种压缩模式。VCA、FET和OPTO。您只需选择要使用的模式。所以，它是基本的“可切换”模式压缩机。但这些按钮不是单选按钮，可以一键选择模式。您需要单击活动按钮来禁用它并启用另一种模式。额外点击？？？为什么？

Because you can use these modes TOGETHER! This is "Blendable" part!

因为您可以同时使用这些模式！这是“可融合”部分！

You can select VCA and OPTO or VCA and FET or any of them or all of them, at the same time! These circuits are PARALLEL and they will be summed according to their count. For example, if you use two mode at the same time, you will get 50/50. If you use all of them, you will get 33.33~/33.33~/33.33~. Using one? 100...

您可以同时选择VCA和OPTO或VCA和FET或其中任何一个或全部！这些电路是并行的，它们将根据计数相加。例如，如果您同时使用两种模式，您将获得50/50。如果您使用所有模式，您将会获得33.33~/33.33~/33.33~。使用一个？100...

That's all!

这就是全部！

FEATURES

特征

- Two compressors in series with three circuits for each

-两台压缩机串联，每台压缩机三个回路

- Multiple circuits are usable for each compressor (VCA - FET - OPTO)

-每个压缩机可使用多个电路（VCA-FET-OPTO）

- THRESHOLD +10dB to -20dB

-阈值+10dB至-20dB

- RATIO 1:1 to 20:1 (With 1:1 you can get extra transformer color)

-比例1:1到20:1（1:1可以获得额外的变压器颜色）

- ATTACK 0.1 to 50ms

-攻击0.1至50ms

- RELEASE 0.05 to 2sec

-释放0.05至2秒

- INPUT +/-15dB gain compensated (Usable if Threshold can't reach low signals or if you want to push it harder!)

-INPUT+/-15dB增益补偿（如果阈值不能达到低信号，或者如果您想更用力，则可用！）

- MAKE-UP +/-15dB

-补偿+/-15dB

- MIX will "mix" dry and wet signal

-MIX将“混合”干湿信号

- EXT will engage External Side-Chain for second compressor

-EXT将接合第二台压缩机的外部侧链

- POWER will bypass whole plug-in

-POWER将绕过整个插件

- ANALOG OBSESSION label is oversampling. Simply click it and engage 4x oversampling.

-模拟障碍标签过采样。只需单击它并进行4倍过采样。

- Touchscreen support

-触摸屏支持

- Resizable interface. Simple "Bottom Right Corner Handle" to resize. 50% to 200%.

-可调整接口大小。简单的“右下角手柄”可调整大小。50%至200%。

*Resizing Tip: When you duplicate plug-in, it will remember current state of GUI size. But if you load new instance, it will be opened at default size. To get rid of this issue, simply follow these steps;

*调整大小提示：当您复制插件时，它将记住GUI大小的当前状态。但如果加载新实例，它将以默认大小打开。要解决这个问题，只需遵循以下步骤即可；

1. Open plug-in for the first time

1.首次打开插件

2. Resize GUI according to your screen resolution or you liking before setting any knobs

2.在设置任何旋钮之前，根据屏幕分辨率或您的喜好调整GUI大小

3. Save this state as default preset with your DAW

3.将此状态保存为DAW的默认预设

Now, you will be able to load new instances with same size.

现在，您将能够加载相同大小的新实例。

(If you want to go default size, simply double click to resize handle.)

（如果您想使用默认大小，只需双击调整手柄大小。）

AVAILABLE FORMATS

可用格式

VST3 / AU / AAX Native - Audiosuite | Mac 10.11 - 13.X (Requires a graphics card that supports "Metal")

VST3/AU/AAX本机-音频套件| Mac 10.11-13.X（需要支持“金属”的图形卡）

VST3 / AAX Native - Audiosuite | Windows 10 - 11

VST3/AAX本机-音频套件| Windows 10-11

VERSION 1.1 - 17.11.2022

版本1.1-17.11.2022

- Added HPF (Side-chain)

-增加了HPF（侧链）

- Adjusted scales of Attack, Release and Ratio

-调整后的攻击、释放和比率

- Fixed Ratio readout

-固定比率读数

游客，如果您要查看本帖隐藏内容请回复