zOne.sk Eclipsis v1.0 混合波表合成器x86 VST WiN

流云高飞

Eclipsis是一种混合波表合成器，具有三个振荡器，每个振荡器具有自己的频率和减法调制。通过具有9个源和39个调制目标的6个LFO可分配槽调制矩阵，可以进行额外调制。Arp/Gate（动态）模块，能够为7个目标分配路由。两个效果架，每个都包含混响、合唱和延迟效果。独特的预设随机化、子预设保存/加载，方便预设创建等。

Eclipsis is hybrid wavetable synthesizer with three oscillators each with his own frequency and subtractive modulation. Additional modulation possible with 6 LFO assignable trough modulation matrix with 9 sources and 39 modulation targets. Arp/Gate (Dynamics) module with abillity to assign routing to 7 targets. Two effects racks, each containing Reverb, Chorus and Delay effect. Unique preset randomization, subpreset saving/loading for easy preset creation and more.

Use right mouse click to set default parameters on all controls and double right click to set it to zero.

使用鼠标右键单击设置所有控件的默认参数，然后双击鼠标右键将其设置为零。


Specification:

规范：


Preset manager.

预设管理器。

Complex preset randomization.

复杂的预设随机化。

Subpreset saving/loading for easy preset creation/modyfication.

子重置保存/加载，方便预设创建/修改。

Main aplitude control.

主要适用于控制。

Polyphony / voice selector (up to 32 voices).

复调/语音选择器（最多32种语音）。

Portamento (glide).

滑翔机。

3 independent oscillators each with route output, detune, phase offset, scope, ADSR, smoothing control (1 pole LP filter), pan and amplitude control.

3个独立振荡器，每个振荡器具有路径输出、失谐、相位偏移、范围、ADSR、平滑控制（单极LP滤波器）、pan和振幅控制。

118 Waveshapes and 3 additional tools to adjust base Waveshape (increase total number of final shapes to 1888).

118个波形和3个附加工具来调整基本波形（将最终形状的总数增加到1888）。

FM modulation with selectable input signal source (Frequency, Pitch, Velocity), detune, waveshaper, scope, smoothing (1 pole LP filter) and amplitude control.

调频调制，可选择输入信号源（频率、音调、速度）、失谐、波形整形器、范围、平滑（单极LP滤波器）和振幅控制。

Subtractive modulation with 17 Filter types, cutoff modulation with selectable input signal source (Frequency, Pitch, Velocity), detune, waveshaper, ADSR, scope, smoothing (1 pole LP filter) and amplitude control.

具有17种滤波器类型的减法调制、具有可选输入信号源（频率、音调、速度）的截止调制、失谐、波形整形器、ADSR、范围、平滑（单极LP滤波器）和振幅控制。

Mod matrix with amplitude controls, 9 input sources and 39 mod targets.

带振幅控制的模矩阵，9个输入源和39个模目标。

6 LFOs.

6个LFO。

2 Effect rack each with Reverb, Chorus/Flanger and Delay (syncable to host) effect.

2个效果架，每个具有混响、合唱/翻边和延迟（可与主机同步）效果。

Arp/Gate module with 8 selectable targets, adjustable number of Steps (4-32), frequency control and divider (example: divide one 32 step pattern to 2 patterns with 16 steps), playback control (Forward, Forward and hold, Backward, Backward and hold, Ping Pong /Forward-Backward/).

具有8个可选目标的Arp/门模块、可调步数（4-32）、频率控制和分频器（例如：用16步将一个32步模式划分为2个模式）、播放控制（向前、向前和保持、向后、向后和保持、乒乓/向前和向后）。

Arp module section for semitones (+/-1 octave range) and for octaves (+/- 5 octaves range, pattern randomization, shift, load and save.

半音阶（+/-1倍频程）和倍频程（+/-5倍频程）、模式随机化、移位、加载和保存的Arp模块部分。

Gate module with smoothing controls, randomization.

具有平滑控制、随机化的门模块。

MIDI CC and MIDI learn will be implemented in next version.

MIDI CC和MIDI学习将在下一版本中实现。


Windows only (32-bit), VST 2.4.

仅限Windows（32位），VST 2.4。


Installation: extract to your VST folder with all subfolders inside. Thoose subfolders contians subpresets and they should be in same folder as eclipsis.dll. Eclipsis will then automaticly open corresponding folder for selected section.

安装：解压缩到VST文件夹，其中包含所有子文件夹。这些子文件夹包含子文件夹，它们应该与eclipsis.dll位于同一文件夹中。然后，Eclipsis将自动打开选定部分的相应文件夹。

游客，如果您要查看本帖隐藏内容请回复