累计签到:58 天 连续签到:2 天
|
WIN格式: | |
MAC格式: | |
Linux格式: | |
其它系统: | |
其它系统格式: | 问题投诉 |
通用格式: | |
其它系统: | |
容量: | 618M |
微信公众号输入命令: | 请在微信公众号中输入前面红色字体命令获取提取码等内容,这里没有内容就表示不需要 |
公众号回复内容: | 隐藏内容 查看操作方法 |
下载方式: | 网盘下载 当前帖子ID:
|
关注公众号 | vstivip |
The "BA-73" library contains Acustica Audio Nebula preamp/console style gain stage coloration programs based on the BAE 1073mp preamp.
“BA-73”库包含基于BAE 1073mp前置放大器的Acustica Audio Nebula前置放大器/控制台式增益级着色程序。
Measurement data was acquired via Prism Orpheus conversion, Vovox cables, Avedis Audio adapters, Rothwell attenuators, and the Creative Audio Labs MW1 Studio Tool.
测量数据通过Prism Orpheus转换、Vovox电缆、Avedis音频适配器、Rothwell衰减器和Creative Audio Labs MW1 Studio工具获取。
Feature Set
特征集
Drive Configuration:
驱动器配置:
Each program has a dual gain control, one for adjusting input/output levels (and subsequently where in the dynamic convolution set the audio will pass through), and one for increasing or decreasing harmonic saturation at the assigned level.
每个程序都有一个双增益控制,一个用于调整输入/输出电平(以及随后在动态卷积集中音频将通过的位置),另一个用于增加或减少指定电平的谐波饱和。
Programs (8):
项目(8):
Instrument
仪器
Instrument level and impedance signal fed to the Direct Inject input.
输入到直接注入输入的仪器电平和阻抗信号。
Instrument Cranked
仪器转动
Instrument level and impedance signal fed to the Direct Inject input, with a 10 dB static attenuator placed on the output and the gain raised to compensate.
仪器电平和阻抗信号馈送至直接注入输入,输出端放置10 dB静态衰减器,增益升高以进行补偿。
Line
线
Line level and impedance signal fed to the line input.
馈送至线路输入的线路电平和阻抗信号。
Line Cranked
线曲柄
Line level and impedance signal fed to the line input, with a 10 dB static attenuator placed on the output and the gain raised to compensate.
线路电平和阻抗信号馈送至线路输入端,输出端放置10 dB静态衰减器,增益提高以进行补偿。
Mic 300
麦克风300
Microphone level and impedance signal fed the the microphone input at the 300 ohm setting.
麦克风电平和阻抗信号以300欧姆设置馈送至麦克风输入。
Mic 300 Cranked
麦克风300转动
Microphone level and impedance signal fed the the microphone input at the 300 ohm setting, with a 10 dB static attenuator placed on the output and the gain raised to compensate.
麦克风电平和阻抗信号以300欧姆设置馈入麦克风输入端,输出端放置10 dB静态衰减器,增益提高以进行补偿。
Mic 1200
麦克风1200
Microphone level and impedance signal fed the the microphone input at the 1200 ohm setting.
麦克风电平和阻抗信号以1200欧姆设置馈送至麦克风输入。
Mic 1200 Cranked
麦克风1200启动
Microphone level and impedance signal fed the the microphone input at the 1200 ohm setting, with a 10 dB static attenuator placed on the output and the gain raised to compensate.
麦克风电平和阻抗信号以1200欧姆设置馈入麦克风输入端,输出端放置10 dB静态衰减器,增益提高以进行补偿。
File Format
文件格式
Compatible Platform: Nebula by Acustica Audio
兼容平台:Acustica Audio的Nebula
Nebula Version Required: Nebula 2 & 3 (commercial version ONLY) v1.3.504 and above
所需星云版本:星云2和3(仅商业版)v1.3.504及以上版本
File Inclusions: Program & Vector file pairs (.n2p, .n2v)
文件包含:程序和矢量文件对(.n2p、.n2v)
Sample Rate: 96 kHz (Nebula can re-sample internally to other rates)
采样速率:96 kHz(星云可以内部重新采样到其他速率)
10 Kernel harmonic depth
10核谐波深度
GDRIVE+DRIVE gain structure control
GDRIVE+驱动增益结构控制
|
|