FLUX StereoTool v3 v21.12.0.50123完整的立体成像和分析工具 VST AU AAX WiN macOS x86 x64

流云高飞 · 发表于 2022-5-27 08:51:25

立体工具提供超精确的输入增益控制和左右通道的单独平移，精确的视觉反馈反映信号内容；矢量示波器，PPM输入/输出仪表，相位相关仪表，永久监测信号和单个左右极性反转–无需加密狗或许可证激活–100%免费！
StereoTool offers ultra-precise control of input gain and individual pan for left and right channels, accurate visual feedback reflecting the signal content with; a vector scope, PPM meters for inputs/outputs, phase correlation meter permanently monitoring the signal and individual left and right polarity reversal – No dongle or license activation required – 100% Freeware!

All Features

所有功能

->Input Gain controls for adjusting the level for left and right channels before processing

->用于在处理前调整左右通道电平的输入增益控制

->Phase inversion of the incoming signal on left and right channels

->左右通道输入信号的相位反转

->Individual panning control for left and right channels

->左右声道的单独平移控制

->Vector Scope Display providing accurate visual feedback reflecting the signal stereo image content graphically.

->矢量示波器显示器提供精确的视觉反馈，以图形方式反映信号立体图像内容。

->Global Stereo Width and Pan settings providing precise management of the stereo signal.

->全局立体声宽度和平移设置可精确管理立体声信号。

->PPM meters for both input and output gain

->输入和输出增益PPM计

->Phase correlation meter permanently monitor the signal.

->相位相关仪永久监测信号。

->Open Sound Control Support

->开放式声控支持

Preset and Parameter Handling

预设和参数处理

->Preset/Parameter slots

->预设/参数插槽

->To enhance the workflow the two Preset/Parameter slots, A and B, can be loaded with two full set of parameters at the same time. Apart from saving each preset, a “Global Preset” containing both the A and B settings, and the position of the “Morphing Slider”, can be saved.

->为了增强工作流，可以同时加载两个全套参数的两个预设/参数插槽A和B。除了保存每个预设外，还可以保存包含a和B设置以及“变形滑块”位置的“全局预设”。

->Parameter Morphing Slider with Automation

->自动参数变形滑块

->The Morphing Slider provides morphing between the parameter settings of slot A/B allowing for really creative and useful real-time tweaking. Enabling the Automation control button exposes the Morphing Slider to the host automation.

->变形滑块在插槽A/B的参数设置之间提供变形，从而实现真正有创意和有用的实时调整。启用“自动控制”按钮将向主机自动显示变形滑块。

Phase Integrity Control

相位完整性控制

The Vector Scope instantly reveals the phase integrity of your mix, when out of phase the information on the meter is lying horizontal. With StereoTool this can be fixed with a simple click on the left or right phase polarity switch to flip and reverse one of the channels you’re back in phase again!

矢量范围可立即显示混合的相位完整性，当相位不一致时，仪表上的信息处于水平位置。使用立体定向工具，只需点击左侧或右侧相位极性开关，即可翻转和反转其中一个通道，您就可以再次回到相位！

Dual Preset Slots and Parameter Morphing
双预设插槽和参数变形

The built in preset manager and the preset morphing slider, provides instant and intuitive control of all parameters and controls. In a second, with a simple one-click operation, everything is copied from one of the two preset slots to the other, even during playback.

内置预设管理器和预设变形滑块可即时直观地控制所有参数和控件。在一秒钟内，通过简单的单击操作，即使在播放过程中，所有内容都会从两个预设插槽中的一个复制到另一个。

The two Preset/Parameter slots, A and B, can be loaded with two full set of parameters at the same time, and except for only A/B comparing two sets of parameters, the morphing slider will allow to mix them, and to record the morph with the host automation.

两个预设/参数插槽A和B可以同时加载两组完整的参数，除了A/B比较两组参数外，变形滑块将允许混合它们，并使用主机自动化记录变形。

游客，如果您要查看本帖隐藏内容请回复