Viator DSP Multi-Q v1.3.1均衡效果 器插件三种模式可选 VST3 AU x64 WiN macOS

流云高飞

我称之为Multi-Q-一个插件中的三个EQ模型，一个图形、参数化和管状EQ。如果您愿意，您可以同时使用所有三个EQ，或者只使用一个频带。滤波器在增益为0 dB时关闭，以节省宝贵的CPU，所以不要害怕只使用一个频带就可以加载它。Multi-Q还具有低通和高通滤波器、管畸变驱动、中间/侧面处理、过采样和相位反转。使用右侧的3个按钮切换EQ UI焦点，并进行调整！

I call it the Multi-Q - three EQ models in one plugin, a graphic, parametric, and tube EQ. You can use all three EQ's at once if you wish or just one band. The filters turn off at 0 dB of gain to save precious CPU, so don't be afraid to load it up to just use one band. Multi-Q also has low and high pass filters, a drive for tube distortion, mid/side processing, oversampling, and a phase inversion. Use the 3 buttons on the right side to switch EQ UI focus and have at it!


Although the UI looks like famous analog EQ's, this isn't supposed to be a hardware emulation, just a familiar interface and a starting point for creativity. Each EQ model's parameters were determined by my own EQing practices and I hope you find it useful!

虽然UI看起来像著名的模拟EQ，但这不是一个硬件仿真，只是一个熟悉的界面和创造力的起点。每个EQ模型的参数都是由我自己的EQing实践确定的，我希望你会发现它很有用！

Here are the features:

以下是功能：
Graphic EQ
图示均衡器
- 10 EQ bands from 31 to 15K hertz each with -12 to 12 dB of gain. These bands also

-从31到15K赫兹的10个EQ频段，每个频段的增益为-12到12 dB。这些乐队也

use proportional bandwidth to behave more like hardware.

使用成比例的带宽来表现得更像硬件。

Parametric EQ
均衡器
- 4 EQ bands, each with its own frequency selecting knob and -12 to 12 dB of gain.

-4个EQ频段，每个频段都有自己的频率选择旋钮和-12到12 dB的增益。


Tube EQ
管式均衡器
- 2 sets of EQ bands each with a boost and cut knob for highs and lows. There's also a
-2组均衡器频带，每个频带都有一个用于高电平和低电平的升压和切断旋钮。还有一个
frequency selecting knob for each set of bands and a shard bandwidth knob.
每组频带的频率选择旋钮和分片带宽旋钮。


- High and Low pass filters.
-高通和低通滤波器。
- Drive for tube-style saturation.
-驱动管式饱和。
- Output trim to control the output volume.
-输出微调控制输出音量。

- Reset button to reset all sliders for the chosen model to 0 dB.

-重置按钮，将所选模型的所有滑块重置为0 dB。

- Quality menu to select between no oversampling and 2 times oversampling.

-“质量”菜单可在无过采样和2次过采样之间进行选择。

- Stereo menu to select mid/side processing choices - which are stereo, mids, or sides.

-Stereo（立体声）菜单可选择中间/侧面处理选项，即立体声、中间或侧面。

- Phase invert button

-相位反转按钮

- CPU monitor that can be toggled on or off

-可开关的CPU监视器

- Ability to type values into the dials and faders.

-能够在拨号盘和音量控制器中键入值。

- Filters individually turn of when set to 0 dB to save on CPU, same goes for the drive and

-当设置为0 dB以节省CPU时，过滤器会单独打开，驱动器和

the high/low pass filter when set to 20 and 20K hertz respectively.

分别设置为20和20K赫兹时的高/低通滤波器。



UPDATE

更新

- Fixed an issue where the two mid filters of the parametric model were not processing.

-修复了参数化模型的两个中间过滤器未处理的问题。

- Fixed an issue where the bandwidth dial of the tube model was not processing.

-修复了未处理tube模型的带宽拨号的问题。

- Fixed an issue where the left side of the highpass fader and the graphic button were unresponsive due to being covered by the edges of another component.

-修复了高通音量控制器左侧和图形按钮因被另一个组件的边缘覆盖而无响应的问题。



Plugin Formats

插件格式

- Mac Universal (M1 and Intel) AU and VST 64 Bit

-Mac Universal（M1和Intel）AU和VST 64位

- Windows VST3 64 Bit

-Windows VST3 64位

游客，如果您要查看本帖隐藏内容请回复